Exxelia at EMV
Exxelia is pleased to exhibit at EMV 2019 in Stuttgart, Germany from March 19 to 21 inHall C2 Booth# 113, Exxelia will be introducing a new filter design conception.
Showcased at Exxelia’s booth #113 in Hall C2, will be Asymmetric filter solutions, the most optimized design in the market.
Smaller, lighter and consequently easier to install, Exxelia is the only manufacturer to solve HEMP requirements with Asymmetric filter designs, hence addressing the security challenges of tomorrow.
Exxelia pushes the limits of design with the new BDP series allowing a 50% space saving in your installation while keeping high technical specifications (insertion loss of 80dB, 1250A, 300kHz to 18GHz) and complying with the MIL STD 188 125 1&2 test requirements.
Asymmetric designs allow to combine safety and miniaturization while still handling HEMP and TEMPEST requirements. Three important benefits stand out from this conception, starting with a lower heat dissipation: as no magnetic field is generated, inductors suffer no heat dissipation. Secondly, the leakage is significantly lower thanks to a low value capacitance. Finally by using only one common inductor, these designs definitely save space.
Dr. Guillaume Aubard, Exxelia Filters’ Business Development Manager will be speaking at EMV Forum Hall C2-319 on March 20th from 3:40pm to 4pm about the Asymmetric filter solutions for HEMP and TEMPEST following by a Q&A.
New Plug&Play filters for datacenters and mission critical facilities
Electronic equipment can leak sensitive information over conducted or radiated electromagnetic emanations, and signals transmitted down unprotected lines can potentially be intercepted. That’s why filters are implemented into systems to prevent EMI disturbances, as TEMPEST filters stop the high frequency EM signals (or noise) emanating inside the secured environment. Exxelia has a long history of manufacturing state-of-the-art electromagnetic interference (EMI) filtering technologies for space, avionic and defense markets. Thanks to this in-depth knowledge, Exxelia came to the conclusion that the installation of a product is as critical as its reliability, especially when shielding continuity and sensitive copper terminals are involved. That’s where Exxelia’s new full range of TEMPEST pluggable filters will save time and spare headaches! The 9260W series is a multi-socket line extension with a built-in 16A Tempest filter (minimum 60dB, from 100KHz to 1GHz), CE qualified according to EM 60950-1 standard. 9260W series Plug&Play solution is available with UK, US and EU standard plugs and can be provided with any other standard plug upon request. In addition, Exxelia completed its offer with the 9259W series of pluggable filters featuring various plug interfaces such as VGA/DVI, USB, Ethernet, Phone, Audio and much more. 9260W series and 9259W series are both fully compliant with EMC expectations and allow considerable time saving and cost-effectiveness. When a standard filter needs to be wired and shielded to each socket one-by-one before carefully re-closing the whole equipment, Exxelia new series can be installed using no special tools and with a smaller footprint. To all people handling sensitive information, a simple plugging operation is now enough to protect their data. Available now, 9259W and 9260W series are fully customizable upon request.
Larger Batches of High Q-Factor Dielectric Resonators
Dielectric resonators are designed to replace resonant cavities in microwave functions such as filters and oscillators. Exxelia with the support of ESA and CNES developed the E7000 series that provides a narrow bandwidth with smaller size. E7000 is Ba-Mg-Ta materials based that combines an ultra-high Q-factor and the possibility to get all the temperature coefficients upon request. E7000 features the high-performance requested for space use in the frequency range from 5 to 32 GHz, and guarantees up to Qxf > 250 000 at 10GHZ. Being one of the few manufacturers producing its own raw materials, Exxelia perfectly masters the production of dielectric resonators. Induced by the success of this new range, the company is now able to provide larger batches (up to 20kg of powder) of its E7000 series while keeping the exact same product properties, resulting in opportunities for cost-effective volume fabrication. Typical applications for the E7000 series: Satellite multiplexing filter devices, radio links for communication systems (LMDS), military radars.